Fiction and Fusion

From Centauri Dreams:

Having looked at the Z-pinch work in Huntsville yesterday, we’ve been kicking around the question of fusion for propulsion and when it made its first appearance in science fiction. The question is still open in the comments section and I haven’t been able to pin down anything in the World War II era, though there is plenty of material to be sifted through. In any case, as I mentioned in the comments yesterday, Hans Bethe was deep into fusion studies in the late 1930s, and I would bet somewhere in the immediate postwar issues of John Campbell’s Astounding we’ll track down the first mention of fusion driving a spacecraft.

While that enjoyable research continues, the fusion question continues to entice and frustrate anyone interested in pushing a space vehicle. The first breakthrough is clearly going to be right here on Earth, because we’ve been working on making fusion into a power production tool for a long time, the leading candidates for ignition being magnetic confinement fusion (MCF) and Inertial Confinement Fusion (ICF). The former uses magnetic fields to trap and control charged particles within a low-density plasma, while ICF uses laser beams to irradiate a fuel capsule and trap a high-density plasma over a period of nanoseconds. To be commercially viable, you have to get a ratio of power-in to power-out somewhere around 10, much higher than breakeven.

Image: The National Ignition Facility at Lawrence Livermore National Laboratory focuses the energy of 192 laser beams on a target in an attempt to achieve inertial confinement fusion. The energy is directed inside a gold cylinder called a hohlraum, which is about the size of a dime. A tiny capsule inside the hohlraum contains atoms of deuterium (hydrogen with one neutron) and tritium (hydrogen with two neutrons) that fuel the ignition process. Credit: National Ignition Facility.

Kelvin Long gets into all this in his book Deep Space Propulsion: A Roadmap to Interstellar Flight (Springer, 2012), and in fact among the books in my library on propulsion concepts, it’s Long’s that spends the most time with fusion in the near-term. The far-term possibilities open up widely when we start talking about ideas like the Bussard ramjet, in which a vehicle moving at a substantial fraction of lightspeed can activate a fusion reaction in the interstellar hydrogen it has accumulated in a huge forward-facing scoop (this assumes we can overcome enormous problems of drag). But you can see why Long is interested — he’s the founding father of Project Icarus, which seeks to redesign the Project Daedalus starship concept created by the British Interplanetary Society in the 1970s.

Seen in the light of current fusion efforts, Daedalus is a reminder of how massive a fusion starship might have to be. This was a vehicle with an initial mass of 54,000 tonnes, which broke down to 50,000 tonnes of fuel and 500 tonnes of scientific payload. The Daedalus concept was to use inertial confinement techniques with pellets of deuterium mixed with helium-3 that would be ignited in the reaction chamber by electron beams. With 250 pellet detonations per second, you get a plasma that can only be managed by a magnetic nozzle, and a staged rocket whose first stage burn lasts two years, while the second stage burns for another 1.8. Friedwardt Winterberg’s work was a major stimulus, for it was Winterberg who was able to couple inertial confinement fusion into a drive design that the Daedalus team found feasible.

I should mention that the choice of deuterium and helium-3 was one of the constraints of trying to turn fusion concepts into something that would work in the space environment. Deuterium and tritium are commonly used in fusion work here on Earth, but the reaction produces abundant radioactive neutrons, a serious issue given that any manned spacecraft would have to carry adequate shielding for its crew. Shielding means a more massive ship and corresponding cuts to allowable payload. Deuterium and helium-3, on the other hand, produce about one-hundredth the amount of neutrons of deuterium/tritium, and even better, the output of this reaction is far more manipulable with a magnetic nozzle. If, that is, we can get the reaction to light up.

It’s important to note the antecedents to Daedalus, especially the work of Dwain Spencer at the Jet Propulsion Laboratory. As far back as 1966, Spencer had outlined his own thoughts on a fusion engine that would burn deuterium and helium-3 in a paper called “Fusion Propulsion for Interstellar Missions,” a copy of which seems to be lost in the wilds of my office — in any case, I can’t put my hands on it this morning. Suffice it to say that Spencer’s engine used a combustion chamber ringed with superconducting magnetic coils to confine the plasma in a design that he thought could be pushed to 60 percent of the speed of light at maximum velocity.

Hmm..if I recall, Robert Heinlein’s story “Orphans of the Sky“, the starship Vanguard ‘s main power source was called the ‘converter’, which was a fusion reactor that not only fused hydrogen, but any other material thrown into it. That story ( actually two stories ) was first written in 1941, definitely the World War 2 era.

Again Paul Gilster links the past with the present. Great job Paul!

Fusion and the Starship: Early Concepts


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: